Looking for:
Sysprep windows 10 computer name prompt free download
To deploy a system image to different computers, you must first prepare the image by running Sysprep in Windows Luckily, detailed instructions are described here. Have you ever heard about Sysprep System Preparation in Windows 10? Built into Windows, it is often used to prepare a system image, which can be deployed to multiple computers. The preparation process is also called generalizing the image.
If you want to install the same OS on many computers simultaneously, you can create a system image and then deploy it to other computers. Note that the SID information will be copied to other devices at the same time. Thus, you must remove the computer-specific information before deployment.
Luckily, Microsoft created Sysprep for this purpose. Select Command Prompt Admin from the menu. Select Shutdown from the drop-down menu. Then click OK. Care must be taken when using Sysprep, as it has some limitations.
Here are three major restrictions of Sysprep. On a single system image, you can run Sysprep up to 8 times. After running this tool 8 times, you must recreate your system image.
Sysprep may fail if you install or update Microsoft Store apps before generalizing a system image. Users are often disappointed to find Windows 10 Sysprep fails when the Generalize checkbox is enabled. In fact, you still have chances to deploy system remotely if you read on. This freeware works well to deploy system to other computers over a network. The SID information will not be copied during the deployment process.
Unlimited computers can be deployed at the same time. Download this freeware today! All client computers should support PXE boot. If not, exclude it please. The disk sequence numbers for storing system in target computers must be the same. Move out other disks and only keep the destination disk. Cant you just upgrade your OS deployment environment as Ghost 7. Thanks to supawat1 from: Oaktech 5th November I think we used to leave the computer name blank in the sysprep XML if I’m not mistaken.
Look at MDT I’d suggest. With Ghost you should have a license for each machine you use on it for unless they have changed the licensing. I used to use Ghost a lot before we used MDT and it is such a different improved way to work.
We get the task sequence to install the OS and all applications in a VM and capture afterwards completely automatically just leaving us to add the drivers for any new workstations at the point of image deployment. Last edited 5th November at AM. With MDT in use here as part of the initial steps of selecting what image you want it gives a box saying to enter the machine name and select the OU for it,. So how do I do it?
It’s as simple as that. I’ve deployed hundreds of computers using this method. You’re better off having clearly labelled OUs instead, which takes minutes to do Hope this helps! Originally Posted by Michael. As far as I know the computer name has been removed from the OOBE out of the box experience so they way around it would be a powershell script once you have logged in on a local account which changes the computer name.
Another useful removal which is included in Windows Thanks to Localtechie from: MarcBeaudoin 22nd April Originally Posted by MarcBeaudoin. I’m trying to put the computer’s serial number here instead of an auto-generated computer name. Do you have any idea how to do that? I have a working solution for Windows 7 but it does not work with Windows Thanks to Michael from: MarcBeaudoin 26th April Poweshell to for Minisetup You’ve probably resolved this – but here is what I do here.
Thanks a ton! Have a Happy New Year!! Posted by: bradwin 9 years ago. Hi there I cannot seem to download the script Corey posted about. I am not a Kace user. Using SCCM. Please post script. Rating comments in this legacy AppDeploy message board thread won’t reorder them, so that the conversation will remain readable.
Answer this question. Posted by:. In previous versions of Windows, you could use the SkipRearm answer file setting to reset the Windows Product Activation clock when running Sysprep.
If you are using a volume licensing key or a retail product key, you don’t have to use SkipRearm because Windows is automatically activated. Installing new Microsoft Store apps or updating your existing Microsoft Store apps before generalizing a Windows image will cause Sysprep to fail. This package will not function properly in the sysprep image.
Instead of using the Microsoft Store to update your apps, you should sideload updates to your line-of-business apps, provision offline-licensed Microsoft Store for Business apps for all users, or have end-users update their apps by using the Microsoft Store on their destination PCs.
If Microsoft Store access in a managed environment is disabled by an IT administrator, end-users will not be able to update the Microsoft Store apps. To generalize an image, you have to first boot into Audit Mode.
Popular Topics in Windows Which of the following retains the information it’s storing when the system power is turned off? Submit ». Gorfmaster1 This person is a verified professional. Verify your account to enable IT peers to see that you are a professional.
Windows 10 expert. Thai Pepper. A basic MDT setup can do this straight out of the box. See links above for more info. So your SetupComplete. The security identifier SID is only replaced on the operating system volume when you execute Sysprep.
If a single PC has multiple operating systems, you must run Sysprep on each image individually. In some cases, customized applications that you install before you recapture the Windows image may require a consistent drive letter.
Some applications store paths that include the system’s drive letter. Uninstallation, servicing, and repair scenarios may not function correctly if the system’s drive letter does not match the drive letter that the application specifies. The Plug and Play devices on the reference and destination PCs do not have to be from the same manufacturer.
These devices include modems, sound cards, network adapters, and video cards. However, the installation must include the drivers for these devices.
Not all server roles support Sysprep. Built into Windows, it is often used to prepare a system image, which can be deployed to multiple computers. The preparation process is also called generalizing the image.
If you want to install the same OS on many computers simultaneously, you can create a system image and then deploy it to other computers.
Note that the SID information will be copied to other devices at the same time. Thus, you must remove the computer-specific information before deployment. Luckily, Microsoft created Sysprep for this purpose. Select Command Prompt Admin from the menu.
Select Shutdown from the drop-down menu. Then click OK. Care must be taken when using Sysprep, as it has some limitations. Here are three major restrictions of Sysprep.
Apologies if this is in the incorrect forum – but it sounded somewhat reasonable : Our DR site service provider requires us to provide a reference image which they will clone via a basic Ghost capture and then deploy to odd PC’s in the event of a DR scenario. I would be most grateful for any guidance with regards to the following: Can we run sysprep on Windows 10 with an answer file which will automatically rename the machine perhaps based on the service tag?
The ideal is to make this as automated as possible and require as little interaction as possible. Perhaps a better idea with as minimal setup as possible. We do have an onsite SCCM distribution point as well if that helps with an alternative solution. Thanks in advice for any guidance on this. SCCM Is an overly complicated tool for what it appears you are trying to do. I personally prefer MDT to create reference images.
I also prefer to deploy them that way too since it has built-in tools for domain join and naming using the Unattended. MDT actually captures a. First of of thanks for taking the time to respond guys, I really am grateful! Secondly, I read over my post and felt I could have done a better job of it! From what I saw from the links provided using MDT would definitely be the way forward for a much better structured approach to the creation of a reference image, and would no doubt be a fantastic learning experience – which I intend to follow up on!
That said, can you guys advise on what would be the best way to handle the following scenario in a very short timeframe: The DR site will provide us with the desktop hardware to conduct our testing, and once complete will ONLY make a basic Ghost image no special Ghost functionality with clever use of switches etc when the machine is returned to them. This can then be cloned and deployed to the odd machines.
With the above step, the key points will be for: a The machine name to be uniquely generated, or perhaps based off the service tag, and b The machine to automatically join the domain Is my thinking above oversimplimified or is it possible to do something like the above? Thanks again all! So what I am understanding is, you will get a machine, then set it up how you need it. AFAIK, all initial setup of the machine, domain join and all, is usually done from the unattend.
Not exactly. We deploy our current Windows 10 image via SCCM on a test machine, sysprep and send back to them – with the desirables mentioned i. It’s our responsibility to ensure that whatever is deployed will be meaningful operationally.
Thanks again. When you Sysprep the machine, do something like this so when it first boots, it will call the unattend file to do the specified settings. Hopefully, when they Ghost the computer, it will be in the Syspreped state. I hope this is what you are looking for. I apologize for the thread necro, but this post came up near the top in a Google search today In case someone else comes looking for this information later, you could always use a simple script combo to do what the OP was asking.
Just modify the SetupComplete. Windows will call it immediately after the Setup process completes, after image deployment. Using the ConvertTo-SecureString parameter will erase the password from system memory afterward, and the script will delete itself as well, leaving no sensitive information open to the public afterward. I’m curious if you are using PS for a specific reason, given the failure I’m hitting. We always used wmic in the setupcomplete. The script runs fine manually, and it’s running automatically because it’s deleting itself, but the wmic commands are flat skipped from what I can see.
I was thinking that Win 10 for some terrible reason didn’t allow rename at this phase, or that the script wasn’t working at all, but now I’m wondering if the OS ignore wmic for some reason and I have to use PS instead?
To continue this discussion, please ask a new question. Get answers from your peers along with millions of IT pros who visit Spiceworks. Hello all. My first time as an actual poster here! Popular Topics in Windows Which of the following retains the information it’s storing when the system power is turned off? Submit ». Gorfmaster1 This person is a verified professional. Verify your account to enable IT peers to see that you are a professional. Windows 10 expert.
Thai Pepper. A basic MDT setup can do this straight out of the box. See links above for more info. So your SetupComplete. Yadin Jul 18, at UTC. This topic has been locked by an administrator and is no longer open for commenting. Read these next
Sysprep System Preparation prepares a Windows installation Windows client and Windows Server for imaging, allowing you to capture a customized installation. Sysprep removes PC-specific information from a Windows installation, „generalizing“ the installation so it can be installed on different PCs. With Sysprep you can configure the PC to boot to audit mode, where you can make additional changes or updates to your image. This allows you to capture the image and apply it to other PCs.
This is known as generalizing the PC. Helps you manage multiple PCs by creating a generic image that can be used across multiple hardware designs. Fine-tune setup of individual PCs by adding apps, languages, or drivers in audit mode. For more information, see Audit Mode Overview. Beginning with Windows 10, version , Sysprep can be used to prepare an image that has been upgraded.
For example:. This process allows enterprises to efficiently and continuously roll out up-to-date Windows 10 deployment images.
Beginning with Windows 8. The Sysprep UI will continue to be supported in this release however it may be removed in a future release. Update your deployment workflow to use Sysprep from the command line. For more information, see Sysprep Command-Line Options.
The security identifier SID is only replaced on the operating system volume when you execute Sysprep. If a single PC has multiple operating systems, you must run Sysprep on each image individually.
In some cases, customized applications that you install before you recapture the Windows image may require a consistent drive letter. Some applications store paths that include the system’s drive letter. Uninstallation, servicing, and repair scenarios may not function correctly if the system’s drive letter does not match the drive letter that the application specifies.
The Plug and Play devices on the reference and destination PCs do not have to be from the same manufacturer. These devices include modems, sound cards, network adapters, and video cards.
However, the installation must include the drivers for these devices. Not all server roles support Sysprep. If you generalize a Windows Server installation that has specific server roles configured, those server roles may not continue to function after the imaging and deployment process. For more information, see Sysprep Support for Server Roles. If you run Sysprep on an NTFS file system partition that contains encrypted files or folders, the data in those folders becomes completely unreadable and unrecoverable.
The Sysprep tool runs only if the PC is a member of a workgroup, not a domain. If a PC is joined to a domain, and the Group Policy of that domain assigns a strong account password policy to the PC, all user accounts will require strong passwords.
Always use strong passwords for your user accounts. If Sysprep encounters an error, you will not be able to run the Sysprep tool on the same Windows image again. Instead, you will first need to redeploy the image. Using a different version of the Sysprep tool to configure an image is not supported.
You must use only the version of the Sysprep tool that is installed with the Windows image that you intend to configure. Sysprep is installed with every version of Windows. If you are using a version of Windows earlier than Windows 10, Version , using the Sysprep tool on upgrade installation types, or to reconfigure an existing installation of Windows that has already been deployed is not supported.
In this case, Sysprep must be used only to configure new installations of Windows. You can run Sysprep an unlimited number of times to build and configure your installation of Windows. Running VM mode outside a virtual machine VM is unsupported.
Sysprep cannot be run under the context of a System account. Sysprep Process Overview. Feedback will be sent to Microsoft: By pressing the submit button, your feedback will be used to improve Microsoft products and services. Privacy policy. Skip to main content. Contents Exit focus mode. Is this page helpful? Yes No. Any additional feedback? Skip Submit.
Sign up today to participate, stay informed, earn points and establish a reputation for yourself! Log in. How to be prompted for computer name?
Hello, Our company purchased a Kbox licence and I am preparing the Win7 deployment at the moment. We are using Kbox version 3. I’ve set up an unattend. We don’t want to deploy with sysprep as we want an hardware independant deployment.
The problem I am facing is with computer name. I removed the computer name line from the unattend. Furthermore, I get an error message on the end of the Win7 installation: „Windows could not parse or process unattend answer file for pass oobeSystem. A component or non-list setting is specified more than once in the answer file“.
Here is my unattend. Answer Summary:. Posted by: dmontgomery 10 years ago. Posted by: OBI 10 years ago. Thanks for your answer, Dave. I got the zip file from the Kace support but still have computer naming issues. I opened a ticket with Kace. Hello Corey, The parsing error is now solved, but not the computer naming one.
On the other hand, the second step setcomputername doesn’t work. I created a postinstall script in the winpe environment as described in the txt file. This postinstall script calls for the x64 exe file and still the computer is named with a random name not matching at all the one typed in the prompt of step 1. I got no feedback from the Kace support so far Further info on the setcomputername problem: When the post install script launches, I get the following error message: „AutoIt error, Line SetComputerNamex Yep, thanks a lot Corey Posted by: vtphilk 10 years ago.
I had this same problem after trying to do a sysimage and use a unattend. I sysprep’ed with that which did have computer name in it but assume it got lost somehow. Once our kace server is back up Its totally down right now : I will check to see if the file in panther folder has the computer name I guess. Posted by: awingren 9 years ago. Thanks, Alicia. Hi Corey, I appreciate your quick response. I thought I had the newest one, but I didn’t.
Thanks a ton! Have a Happy New Year!! Posted by: bradwin 9 years ago. Hi there I cannot seem to download the script Corey posted about. I am not a Kace user. Using SCCM. Please post script. Rating comments in this legacy AppDeploy message board thread won’t reorder them, so that the conversation will remain readable. Answer this question.
Posted by:. OBI Ninja since: 10 years ago. Don’t be a Stranger! Sign up! View more:. Dell detect only schedule detected and deployed not just detected. Auto assign device location depending on IP address. Link Related Links. Direct Indigo Mountain Download Link. UK Hackathon – Get a jump start on your ideas – recruit another attendee or 2 to build a winning submission!
Upgrade your SMA now to keep patching. Post Related Posts.
Deploying a Sysprep Windows 10 Image with Rename Machine and Auto Join Domain – Spiceworks.Sysprep (Generalize) a Windows installation
I am working in a lab enviroement creating Vista images using Norton Ghost 7. I have created an answerfile using AIK. However, I am unable to configure that answerfile to prompt the user for a computer name. A random name is automaticly generated. Can anyone please assist me with this? I pasted the answerfile below.
Specifies the computer name used to access the computer from the network. If ComputerName is empty or missing, the user must enter a computer name in Windows Welcome. Looks like you’re using an UnattendJoin.
I hate to say it, but no matter what you do with the computername setting it will never prompt you during the Specialize phase. It will however prompt you in the OOBE phase, but that creates all kinds of problems since the computer has already been joined to the domain with a randomly generated name. Графики windows 10 usb bootable from dvd free download любопытный you discovered, even if you leave the computer name field blank it still automatically generates a name, joins it to the domain, and prompts you again to change only the local name during the OOBE phase thus severing the trust relationship for the domain account.
As I understand it they’re talking a lot of calls on this and are actively looking at a permanent fix. In the meantime, you can workaround this issue by using an Autologon and running a script in FirstLogonCommands section under oobe System.
So in other words, let it create the computer name for продолжение здесь, join it to the domain, but use the script to rename the machine account. I’ve posted some sample sysprep windows 10 computer name prompt free download below. For Each objComputer in colComputers.
Rename Name, Password, Username. If Err. Echo „System will now restart for change to take effect! Call Restart. Echo „An error occurred renaming the computer! End If. Sub Restart. Dim wshShell. End Sub. That being said, here is what I do to prompt the user for settings, such as ComputerName on Sysprep’ed images Create a VBScript to: a. CreateObject „WScript. If fso. Write strContents unattendFileObject. Close End If. Sleep WshShell. Run sysprep, but do not shutdown yet in an elevated cmd.
Shutdown the system and capture the image using whatever imaging software you use. When you start up this image, the vbscript should run and prompt the user for input – it will then edit the unattend. You should be able to do this for any values in the Sysprep.
Just make sure you use unique strings to search and replace on. My actual EditUnattend. This posting is provided „AS IS“ with no warranties, and confers no rights. I’m not an expert, but I believe if you use WDS to deploy your images, it lets you pre-stage your machines in AD and should do everything you sysprep windows 10 computer name prompt free download in a single pass. You might want to start a new thread to get more traction as the subject of this thread is just about prompting for a computer name.
Doug, not sure if this helps, but I wrote a sysprep windows 10 computer name prompt free download post on manipulating unattend files programmatically:. I have tried this and it does not work for me. The documentation still states to leave the field blank and it will prompt you. Is there a known fix for this yet? All I want is a prompt not an automatic name that Vista gives it.
Gday Guys, I to have been battling with this for a while now and нажмите чтобы узнать больше up sysprep windows 10 computer name prompt free download my own work around wich allows you to add custom scripts to a sysprepped image.
I have just solidworks 2017 premium vs professional free download with prompting for a Computer Name and also promting for a domain user name to add to the local administrators group, add that works a treat as well. Basically, here is my хотел autodesk inventor 2018 network license free download думаю. I want to be able to image a computer.
At first boot, I want to enter a computer name, have the computer bind itself to our domain, and log in to windows ready to use. Looks like a great post. I am trying to follow your instructions here. If you are able to help out that would be awesome. I tried it yesterday though I got confused on where exactly you are placing the sysprep. Any suggestions? That sysprep. If you right click your image in WDS and select properties you can browse to sysprep windows 10 computer name prompt free download sysprep.
It will then create an unattended. We have our windows 7 image that prompts us for a name and joins the domain. Thanks for the reply. I was confused about the locations of all the sysprep files he referred to. This to me says to place the Sysprep.
Also, as you state, to apply the sysprep file to the image in WDS. I understand that portion. So, IF I place my sysprep. I’ll be testing this. You can create your sysprep. We save all of ours on a network share. We just name them based off of the machine that we are creating the image for and we call our universal one unattended.
I also create the. But for some reason when i select the image it dosent propmpt me to add a computer name. Am i doing something wrong on the server becuase a prestaged name is still being generated. First thing first – Stop using MySysprep.
Create the EditUnattend. I created a batch script to run the commands here is an example. I have been working with this script for 2 days and I am unable to have it run during the sysprep process. I have correctly added the line to the registry but the script will not run, meaning it never asks for the computer name input Do you have any ideas? I’ve modified EditUnattend. Basically you no longer have to modify Unattend. However, when the machine comes up, it’s still showing a random generated name.
I have ensured the account in the sysprep file is a member of the domain and is also a local admin. This is sysprep windows 10 computer name prompt free download belief. Here Microsoft is losing market share to Apple faster than you can say „i-anything“ and Microsoft appear to be even more determined than ever to make it as difficult as possible for any non mega-corporation to automate deployment of their own main operating system!?
It’s also impossiblt to find any clear, plain english explanations of how these three technoligies interact with each other during the image deployment process, i. For example, очень amd display driver windows 10 спам is the option to specify a computer name and join domain option during the MDT wizard steps prior to starting an image deployment task sequence.
Why not just have unattend. There’s loads of people trying to get the setup process to prompt but clearly it’s never going to work satisfactorily. Why not just write a FirstLogonCommand.
I’m no self proclaimed script guru so I’m sure much more error checking and smarts can be added to this. It works fine for me. Note that I add the computer to the domain using the automatically generated name and then rename it.
This is because once a computer is renamed it can’t be added to a domain until a reboot has occurred although the reverse is not true. The only smarts I have in my script are:. Will add the IP irrespective if it’s called 2, 3 etc.
Here is a variation on some of the other contributions. Anyone using havealoha’s HTA file? I like this as it uses the service tag.
To deploy a system image to different computers, you must first prepare the image by running Sysprep in Windows Luckily, detailed instructions are described here. Have you ever heard about Sysprep System Preparation in Windows 10?
Built into Windows, it is often used to prepare a system image, which can be deployed to multiple computers. The preparation process is also called generalizing the image. If you want to install the same OS on many computers simultaneously, you can create a system image подробнее на этой странице then deploy it to other sysprep windows 10 computer name prompt free download.
Note that the SID information will be copied to other devices at the same time. Thus, you must remove the computer-specific information before deployment. Luckily, Microsoft created Sysprep for this purpose. Select Command Prompt Admin from the menu. Select Shutdown from the drop-down menu. Then click OK. Care must be taken when using Sysprep, as it has some diwnload. Here are three major restrictions of Sysprep.
On winodws single system image, you can run Sysprep up to 8 times. After running this tool 8 times, you must recreate your system image. Sysprep may fail if you install or update Microsoft Store apps before generalizing a system image. Users are often disappointed to find Windows 10 Sysprep fails when the Generalize checkbox is enabled. In fact, you still sysprep windows 10 computer name prompt free download chances to deploy system syspprep if you read on.
This freeware works well to deploy system to other computers sysprep windows 10 computer name prompt free download a network. The SID information will not be copied during the deployment process. Unlimited computers can be deployed at the same time. Download this freeware today! All client computers should support PXE boot. If not, exclude it please. The disk sequence numbers for storing system in target computers must be the same.
Move out other disks and only keep the sysprep windows 10 computer name prompt free download disk. Choosing a network shared folder or NAS as the destination path when creating system backup. Install and open AID. Then click Next to get into this window. Start all the client downloav from network boot by entering into BIOS and set the network boot as the first boot device. Here you can see the status for all client computers.
Основываясь на этих данных a computer connects to AID successfully, you can get “ Client computers connected „. Click I confirm all the client computers which need to be deployed are online when all the client computers are connected.
Then click Next. Select the client computers you need or click All to select all connected computers. Input the destination disk number. If all the client sysprep windows 10 computer name prompt free download have only one disk reserved, the disk number should be 0.
Universal Restore : you can deploy system image to computers with different hardware. Upgrade to Technician version to enjoy this feature. After confirming your operations, you can click Start Deploy. Then choose whether to shut down or restart жмите сюда client computers.
Although Windows users are given many tools to deploy system image remotely, you must prepare the system image using Sysprep in Windows For many users, Sysprep is time consuming and tree, and sometimes it even goes wrong. Quick Navigation: What is Sysprep in Windows 10?
How to run Sysprep in Windows 10? Follow the steps below to generalize your image and make it ready for deployment. Generalize : removes SID information from the image. Shutdown : once Sysprep completes, shutdown the server. The above steps also work with Sysprep in Читать далее 7. Sysprep limitations you should know Care must be taken when using Sysprep, as it windiws some limitations. Free Backup Software. Still Need Help?
Have your http://replace.me/6030.txt been solved? If not, please input query in the search box below.
Jul 18, · Not exactly. We deploy our current Windows 10 image via SCCM on a test machine, sysprep and send back to them – with the desirables mentioned i.e auto rename and auto join domain. They recieve machine, Ghost it and store it on their server in readiness for a DR scenario – . Jul 05, · This is from the replace.me file: Computer Name: Specifies the computer name used to access the computer from the network. If ComputerName is empty or missing, the user must enter a computer name in Windows Welcome. If you set this value to an asterisk (*), a random computer name is replace.me random name has at most 8 characters from the RegisteredOwner and/or . Dec 02, · Generalization means removing any computer-specific information from the image before deploying it to other computers. And that is exactly what you use Sysprep in Windows 10 for. Sysprep is Microsoft’s utility for generalizing a Windows image so that it . Jul 09, · I have been testing Windows 10 and struggling to, once captured the image to get the propmt to enter a computer name before the PC joining the domain. Sysprep completes and the PC boots and starts but the machine is given a random name. I have tried adding %computername% to the replace.me, using Mysyprep and Mysysprep2 and also removing the.
Mar 03, · 1. Press Windows logo key + X at the same time. Select Command Prompt (Admin) from the menu. 2. Type cd \Windows\System32\Sysprep and then press Enter. 3. Type sysprep and then press Enter to open Sysprep GUI mode. 4. Choose Enter System Out-of-Box Experience (OOBE) and tick the Generalize replace.meted Reading Time: 5 mins. We don’t want to deploy with sysprep as we want an hardware independant deployment. The problem I am facing is with computer name. I don’t want to use wsname, I need the IT guy preparing the PC to be prompted for the computer name. I removed the computer name line from the replace.me, but it didn’t help: no prompt for the computer name. Jul 09, · I have been testing Windows 10 and struggling to, once captured the image to get the propmt to enter a computer name before the PC joining the domain. Sysprep completes and the PC boots and starts but the machine is given a random name. I have tried adding %computername% to the replace.me, using Mysyprep and Mysysprep2 and also removing the.
Install the necessary drivers, applications, and configure other Windows settings. You can generalize the Windows image with the Sysprep utility. Sysprep allows you to delete all the information related to a specific operating system.
All the configuration of the operating system before you run Sysprep remains untouched. This includes the installed software, personalization and network settings, installed and pinned Metro apps on the start screen, File Explorer, and other parameters. In Windows 10 and Windows Server , the Sysprep. After you install a prepared reference Windows 10 image and configured in the correct way with certain installed software, with the operating system settings, with the specified permissions and restrictions , you can deploy it to all computers of the company using MDT, WDS, SCCM or manually take a look at Deploying Windows 10 with MDT and WDS.
You need to customize your reference Windows 10 Image in the Audit Mode. You can also enter Audit Mode using the Sysprep. To do this, run the command:. The computer will automatically restart and boot to the Audit Mode. Windows 10 automatically boots and logs in with the built-in administrator account when in the Audit Mode.
Further, this account will be disabled. Windows 10 will boot in this mode no matter how many times you rebooted your computer until the Sysprep is running. Do not close the Sysprep utility window—you will need it at the end of the configuration step. Minimize it. In Audit Mode, you can configure your Windows 10 reference image. We will take a look at several popular steps that sysops configuring in their reference image most often. You can set your company branded info in the computer properties windows.
The easiest way to configure these settings is through the registry. Create a text file oem. To apply the reg file, double-click on it, and accept registry changes. As a result, these settings will be imported into the registry. You can install drivers and third-party programs you would like to see in your Windows 10 image. You can install programs manually, or using the integrated Windows 10 package manager— Chocolatey. Now install the Chocolatey.
To do this, run the PowerShell console with administrator privileges. Enter the following commands:. Run the command:. You can find packages by their names with the command choco search opera.
You can also install drivers for all computers and laptops models on which you want to deploy this reference Windows 10 image. Download and extract the driver packages to a specific directory. If you need to reboot the Windows to install the application or update, you can do it. After reboot, the system will return to audit mode.
You can clean up your driver repository from driver duplicates using our script. Windows 10 collects information about the operation of users on the computer. Examples of handwriting and voice samples, location information, error reports, calendar contents—all of these can be sent to Microsoft servers.
Run the elevated Command prompt, and execute the following commands:. Starting with Windows 8. If not, the update is not performed. Save the PSWindowsUpdate. Available updates will be downloaded from the Windows Update servers and installed automatically. If your computer has a static IP address configured, specify that the address should be obtained automatically from a DHCP server. You can do that in the network adapter settings.
You can use an answer file together with the System Preparation Sysprep tool. It allows configuring unattended Windows Setup settings. This step is optional used to automatically specify various parameters that must be configured when the image is at first run. You can skip this step, and go straight to the step of capturing a Windows image.
The answer file may contain the answer to each question. This must be selected when installing Windows and choosing the initial settings region, language, product key, keyboard, account, and privacy setting, etc. Follow the steps during the out-of-box experience OOBE. You can create an answer file manually this is simple XML. Run the adksetup. You will need install.
You can copy the install. If only the install. SIM will need you to specify a Windows image file for which you want to create an answer file.
Specify the path to the before installed install. Wait for the SIM to mount the Windows installation image and create the catalog file. When we open the install. Unzip the WSIM Select your Windows 10 edition. If there is only one edition of Windows in your install. Using WSIM, you can configure various parameters of the answer file. For example, you can configure the Windows product key if you are using KMS or MAK keys , time zone, organization and owner info, default language and region settings, input locales, etc.
First of all, we need to do the most important thing: to tell Sysprep to copy all our customizations to the default user profile. Right-click on it, and select Add Setting to Pass 4 specialize. Do not ask 3 security questions for your local account :. If you configured everything correctly, a message should appear in the Messages console: No warning or errors.
Now you can use your autounattend file to the Sysprep your Windows 10 image. Run the elevated command prompt, and execute the following command replace the path to autounattend.
This allows you to safely deploy this reference Windows 10 image on another workstation or laptop. After executing the command, the computer will shutdown. After shutting down your computer, you can capture a customized Windows 10 image using MDT. Below we will consider DISM option. In previous versions of Windows, the ImageX tool could be used to capture and deploy an image.
Boot the computer with the Windows reference image into Windows PE. You can do this by booting the computer from the Windows 10 installation disc, or recovery disc.
In the command window that opens, type Diskpart command. Use the list vol command to identify the drive letters. In our example, the installed Windows image is located on drive D.
Thanks for amazing detailed information. I have created my own customized version of Windows thanks to you. Thanks for a great tutorial — Windows 10 version was the last version I was able to successfully accomplish a Sysprepped image that deployed exactly the way I wanted it to.
Since then I have been unsuccessful in even getting windows to prompt the user to enter the COA Product key. With or without an unattend file, with or without entering and activating windows on initial setup, and with and without entering Audit mode on initial setup. I have tried almost every version since and none of them prompt the user for the COA Product key after running sysprep.
Is this a thing, or am I missing some vital information that is not written in any tutorials? Use unattend. If you are using different version than what the computer shipped with you have to specify the KMS key to get the correct version. Also, the ei. I start this from Task Scheduler on first logon, and make shortcut on Desktop if user miss to enter key on firs tun. Hi, what is the best way to add the answer file if you already have a install.
Below we will consider DISM option. In previous versions of Windows, the ImageX tool could be used to capture and deploy an image. Boot the computer with the Windows reference image into Windows PE.
You can do this by booting the computer from the Windows 10 installation disc, or recovery disc. In the command window that opens, type Diskpart command.
Use the list vol command to identify the drive letters. In our example, the installed Windows image is located on drive D. Thanks for amazing detailed information. I have created my own customized version of Windows thanks to you. Thanks for a great tutorial — Windows 10 version was the last version I was able to successfully accomplish a Sysprepped image that deployed exactly the way I wanted it to.
Since then I have been unsuccessful in even getting windows to prompt the user to enter the COA Product key. With or without an unattend file, with or without entering and activating windows on initial setup, and with and without entering Audit mode on initial setup. I have tried almost every version since and none of them prompt the user for the COA Product key after running sysprep.
Is this a thing, or am I missing some vital information that is not written in any tutorials? Use unattend. If you are using different version than what the computer shipped with you have to specify the KMS key to get the correct version. Also, the ei. I start this from Task Scheduler on first logon, and make shortcut on Desktop if user miss to enter key on firs tun. Posted by:. OBI Ninja since: 10 years ago. Don’t be a Stranger!
Sign up! View more:. Dell detect only schedule detected and deployed not just detected. Auto assign device location depending on IP address. Link Related Links. Direct Indigo Mountain Download Link.
UK Hackathon – Get a jump start on your ideas – recruit another attendee or 2 to build a winning submission! I apologize for the thread necro, but this post came up near the top in a Google search today In case someone else comes looking for this information later, you could always use a simple script combo to do what the OP was asking. Just modify the SetupComplete.
Windows will call it immediately after the Setup process completes, after image deployment. Using the ConvertTo-SecureString parameter will erase the password from system memory afterward, and the script will delete itself as well, leaving no sensitive information open to the public afterward.
I’m curious if you are using PS for a specific reason, given the failure I’m hitting. We always used wmic in the setupcomplete. The script runs fine manually, and it’s running automatically because it’s deleting itself, but the wmic commands are flat skipped from what I can see.
I was thinking that Win 10 for some terrible reason didn’t allow rename at this phase, or that the script wasn’t working at all, but now I’m wondering if the OS ignore wmic for some reason and I have to use PS instead? To continue this discussion, please ask a new question. I need to be able to name the PC as it did in XP and Win7 to deploy and name the machines around the site. Has anyone managed to achieve this?
Many Thanks. What are you using to deploy? I’m using a very old version of Ghost 7. Ive got it to a point of only thing left to do is to get the machine to prompt for a computer name. You are probably run into software compatibility issue here, because you know that it worked with Windows 7, but not Windows Cant you just upgrade your OS deployment environment as Ghost 7.
Thanks to supawat1 from: Oaktech 5th November Make sure you Unattend. CD to the Panther folder and check to see if the unattand. If it is type ’notepad unattend. It looks to me like there may be other people in this thread that aren’t fully clear on the „key pieces“ that make this work. I was hoping you might elaborate a little more on what those keys really are, from some of the perspectives of others in this thread, as well. It looks to me as if you are validating my comment about putting the „unattend.
This is good info I think we are mostly all aware of the fact that the [variable name] in the „Sysprep. But, I still think we need to „clear the air“ about which file s need to be modified and which file s may not. It seems apparent from the content of the script that the „unattend. I just hope those of us who are having problems are not getting stuck on this item due to glossing-over.
If you have any experience with such a thing, it would be good to know if there is a resolution to avoid such a pitfall, as this derailed the whole process, for me. Thanks for your questions regarding this matter and let me to see if I can make this even clearer.
When you run sysprep. The sysprep. This variable could exist in two places in you sysprep. The first would be the standard computer name change section and the second would be in the domain section if you enable AutoLogon of the administrator or some other local account once setup is completed.
That worked, should add to the steps to remove all instances of unattend. I had two copies. If I deleted just the one in Panther, the one from the sysprep directory copied it over. Removing both was the solution Thanks for your reply. Sorry for my delay in responding, as I was on vacation. Yes, I think you have made the picture much clearer.
First, for whatever reason, I was unaware of the Sysprep. Some have sugessted that the [technician] is supposed to copy the „unattend. The fact that SysPrep will make the „Panther“ copy for you is helpful information. This response may actually hold the key to why my test didn’t work: because I only attempted to change the „unattend.
This also explains the naming convention to distinguish between the original file, named „Sysprep. My guess is that this may fix the problem we are having with the AutoLogon not working for us, perhaps because we weren’t, previously, able to fill in the domain information for the local administrator account. If these things work out, „we’ll be in Fat City“. I think you meant „EditUnattend. I’m not at work right now, but when I get there, I will be running a new test, as soon as possible , to see if these items work.
Thanks for the info, once again. It is greatly appreciated! We’ve been trying to „wrangle these horses“ for a long time now. I just finished another round of tests, and so far it’s a success. At this point, we’re only having issues with making the AutoLogon work more than once, on the first go-round. After sysprepping the same machine more than once, this no longer works, but I’ll try to work around this. We, also, had some problems with respect to Group Policy, but I believe further testing will allow us to remedy those issues.
Other than that, we now can successfully name our machines and join the domain, without breaking the Trust Relationship, as we did in the past. This alone will save us a good deal of work and frustration, since the properly named machine now joins the domain „without a lot of rotating and gyrating“. I had my doubts when I tried to modify the [process] slightly, but now, thanks to DTE-ITGuy, I understand the reasons why some of the details are stated as they are, and which ones are to be taken literally – which usually isn’t a problem for me.
I don’t think I can stresss enough how valuable this system is to our deployment process. I will continue to monitor this thread just in case someone brings up any new tricks, or has any issues, related to this thread. I currently dont have an unattend. So, don’t worry about the „unattend. This is because the command we’re using doesn’t shut the machine down, but I’ve found that sysprep locks you out of Windows Explorer, so you must have it already opened, beforehand, if you want to see the contents after sysprep has run.
Check the time-stamp after-process if it was already there before you started. One of the primary goals of this methodology is to make the computer join the domain with it’s final name already in place prior to any attempt to join the domain. As long as you follow Mike’s and DTE’s directions, the script will run prior to the Windows Deployment process; therefore, as long as you have a valid domain, and valid credentials, listed in your XML answer file, it should happily join the domain with the new computer name, which you specified through the script’s dialog prior to the usual deployment process, when the deployment proceeds.
It, also, should be noted that you can name your answer file anything you want or need, i. I apologize if this seems a little long-winded, but I find that the more detail you can describe, the clearer the understanding will be Sorry to resurrect this thread but I’m trying to follow what I’ve read in it and I’m having a strange issue. I’m using the editunattend.
After mini-setup reboots the computer Windows still prompts for a computer name and when I look in ADUC I see the computer has joined with a random name. Please read all previous post and follow the direction exactly. Read, read and read. All the information to make it work is here. Hi cmc. I was too hasty to post to Mike, without realizing the many posts below that answered my question.
However at the risk of sounding stupid again I have another question on the same matter. I have created the. I understand pre-staging, but thats not what I want to do. What I’m trying to acheive is exactly what mike describes with the. Is this not possible? The join domain functionality should be in your sysprep. A tick in a box, is the cause of all that pain. I have another tongue and cheek question though!
I see the code you’ve written that allows a person to type the OU that they would like to place a computer in. Is it possible to have alist of OU’s in a drop down list? Questions are always welcome so feel free to ask. Anyway; my code isn’t actually asking you to enter the OU name but instead select it from a list of predefined OUs which you’ve entered into it. So essentially it is doing exactly what you what you are looking for. This could be Departments you decide and the 2nd list box could have different Locations which would be covered by these lines:.
This information is then written back to the unattend. That is what I do Make sure you format the strings correctly otherwise it will not work.
Using example above the domain name would be my. Copy my full script just as it is above and run it, entering anything for a computer name just to gat pass that. Hi I used the Mike approach for vista and it worked great for prompting for computername. Now in windows 7 I am trying to add prompt for OU in the vbs script. The script bombs out as soon as I do.
If i take out the OU part it works again. Im not a vbs script guy so not sure what I am missing. Any guidance would be much appreciated. Script below:. End If ‚ Launch setup will use the modified unattend. Hi guys im kinda new with this However if i dont join to domain it gives me a name and it sticks in my answer file below i have eula and welcome screen turned off could that be the reason why? Appologies for bringing this up again..
I have amended the script and saved it as a hta. I have also built a windows machine and done the following. Placed a unattend. Run windeployFile, 0, True. I place my sysprep. I finally run the deploy.
Четверо. Всего трое. Халохот стиснул револьвер в руке, не вынимая из кармана. Он будет стрелять с бедра, направляя дуло вверх, в спину Беккера.
Второй – молодой темноволосый, в окровавленной рубашке. – Халохот – тот, что слева, – пояснил Смит. – Он мертв? – спросил директор.